He finally found a beautiful antique bed that you've always wanted, but when you realize the house and your mattress springs are too long for the installation. After these steps, you can follow this old bed, without adversely affecting the value added.
1 .Pilots of the bridge and do not forget to connect the rails together, to remove the step. There is a slot machine with 2 pins in the metal bracket to hold the wing in place.
2. Put a check point on how to find where the thorns and a sign on 2 boards, so the equal.
3. Measure and cut 2 pieces of wood (2 for each side of the bed) to be on both sides of the slit. The wood must be thick enough to allow you to add ? Inch to 1 inch long bed, depending on the thickness of your choice. Remember to leave a space between the 2 pieces of wood so that the blade down the hook half Can. Try to keep the space between the 2 pieces fit to be the same as the space on the platform.
4. Mark the position on Part 2 of the forest, where the pieces were 2
5. Holes in the sticks, which measures the pace. Pre-drilling of these wells is a help.
6. Drill holes through the sides of pieces of wood stud when the marks were made.
7. Plug the stick the edge with heavy arrows.
8. Use a nail or a screw of appropriate size through the game as a pivot. So, you can easily remove the footboard when the bed is allowed to be dismantled.
9. Slide the lateral side rails through the slot and the nail is used as anchors. (It may be necessary for the rail, then slide the nail in the land of the pre-drilled holes slides.)
10. If you need more in length, repeat this process in mind.
No comments:
Post a Comment