If you are caught with a very small room for a bedroom, try a high bed. If yes, with useful wood projects, you can on this project with little problem. Learn the basic steps for building a space-saving bed.
1.Find a space that represents a wall on three pages. Measure area, locate the studs and mark the height where you want to place on the frame.
2.Installation 2 cup 4 inches, the size, at both ends and on the pages attached. Make sure the page will have the time to go from wall to wall. The header and footer must be positioned on the side pieces.
3rd place from 4 cm to the wall, take the mark, too. With a level of control.
4.us wood screws to secure the 2-by-4 inch board to the wall at stud. If you got all three sides by the wall, you have a solid foundation.
5.Cut a 2-by-4 on an inch to the fourth page, and the screws, use the edge of the bed.
Step 6Attach the right frame wooden bed. Be sure to put it and rightly so, because there is little hope of change, if you've built the bed.
No comments:
Post a Comment